Resume Printing After Broken Dots Error Setting (Head Err Prt) - Toshiba B-EP Series Key Operation Specification

6.6.3.2.13

Resume Printing After Broken Dots Error Setting (HEAD ERR PRT)

This setting selects whether or not the printer resumes printing after a broken dots error occurs.
H E A D E R R
H E A D E R R
Default value: OFF (The printer does not resume printing after a broken dots error occurs.)
<Supplemental Explanations>
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
P R T O F F
[PAUSE]
P R T O N
[PAUSE]
- 95 -
The printer does not resume printing after
a broken dots error occurs.
The printer resumes printing after a broken
dots error occurs.