Test Print - Toshiba B-EP Series Key Operation Specification

6.12.4 Test Print

6.12.4.1 Test Print Operation Example
(1) Normal test print
Power OFF
< 0 > S H U T D O W N
< 1 > D I A G N O S T I C
< 2 > M O D E
< 3 > A D J U S T
< 4 > T E S T
P R I N T C O N D I T I O N
S L A N T L I N E ( 1 D O T )
S L A N T L I N E ( 3 D O T )
C H A R A C T E R S
B A R C O D E
N O N - P R I N T I N G
< 4 > T E S T
[PAUSE] [POWER]
[PAUSE]
[PAUSE]
S E T T I N G
[PAUSE]
S E T
[PAUSE]
P R I N T
[POWER]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[FEED] + [PAUSE]
P R I N T
(1) Power off state
(2) While holding down the [PAUSE] key, press
the [POWER] key to turn the power on.
(3) System mode menu display (Shutdown)
(4) Press the [PAUSE] key.
(5) System mode menu display (Self-test)
(6) Press the [PAUSE] key.
(7) System mode menu display
(Mode setting)
(8) Press the [PAUSE] key.
(9) System mode menu display
(Fine adjustment value setting)
(10) Press the [PAUSE] key.
(11) System mode menu display (Test print)
(12) Press the [POWER] key.
(13) Test print condition parameter setting mode
(14) Press the [PAUSE] key.
(15) 1-dot slant line print mode
(16) Press the [PAUSE] key.
(17) 3-dot slant line print mode
(18) Press the [PAUSE] key.
(19) Character print mode
(20) Press the [PAUSE] key.
(21) Bar code print mode
(22) Press the [PAUSE] key.
(23) Non-printing mode
(24) While holding down the [FEED] key, press the
[PAUSE] key.
(25) System mode menu display (Test print)
- 214 -