Label Length Setting (Label Len.) - Toshiba B-EP Series Key Operation Specification

6.6.5.2.6

Label Length Setting (LABEL LEN.)

This setting selects a label length for test print.
L A B E L
L A B E L
L A B E L
L A B E L
L A B E L
L A B E L
Default value: 63mm
<Supplemental Explanations>
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
The default value at power on is 63mm.
The label length, which is larger than the image buffer length, cannot be specified. If specified, the
printer prints the data of image buffer length, then stops.
L E N .
[PAUSE]
L E N .
[PAUSE]
L E N .
[PAUSE]
L E N . 9 9 7 m m
[PAUSE]
L E N . 9 9 8 m m
[PAUSE]
L E N . 9 9 9 m m
[PAUSE]
- 119 -
5 m m Short label
6 m m
7 m m
5mm
999mm
Long label