Test Print; Test Print Operation Example - Toshiba B-EP Series Key Operation Specification

6.6.5

Test Print

6.6.5.1

Test Print Operation Example

(1) Normal test print
Power OFF
< 0 > S H U T D O W N
< 1 > D I A G N O S T I C
< 2 > M O D E
< 3 > P A R A M E T E R
< 4 > A D J U S T
< 5 > T E S T
P R I N T C O N D I T I O N
S L A N T L I N E ( 1 D O T )
S L A N T L I N E ( 3 D O T )
C H A R A C T E R S
B A R C O D E
[FEED] [POWER]
[PAUSE]
[PAUSE]
S E T T I N G
[PAUSE]
S E T
[PAUSE]
S E T
[PAUSE]
P R I N T
[POWER]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
(1) Power off state
(2) While holding down the [FEED] key, press the
[POWER] key to turn the power on.
(3) System mode menu display (Shutdown)
(4) Press the [PAUSE] key.
(5) System mode menu display (Self-test)
(6) Press the [PAUSE] key.
(7) System mode menu display
(Mode setting)
(8) Press the [PAUSE] key.
(9) System mode menu display
(Parameter setting)
(10) Press the [PAUSE] key.
(11) System mode menu display
(Fine adjustment value setting)
(12) Press the [PAUSE] key.
(13) System mode menu display (Test print)
(14) Press the [POWER] key.
(15) Test print condition parameter setting mode
(16) Press the [PAUSE] key.
(17) 1-dot slant line print mode
(18) Press the [PAUSE] key.
(19) 3-dot slant line print mode
(20) Press the [PAUSE] key.
(21) Character print mode
(22) Press the [PAUSE] key.
(23) Bar code print mode
(24) Press the [PAUSE] key.
- 110 -