Toshiba B-EP Series Key Operation Specification page 141

[ T R A N S . ]
[ T R A N S . ]
[ P E ] R 4 . 5 V
[ P E ] R 4 . 5 V
[ B A T T E R Y ]
B A C K L A S H 1
B A C K L A S H 2
< 6 > S E N S O R
< 0 > S H U T D O W N
* Operation example of the B-EP4.
1 . 8 V
[PAUSE]
or
[FEED]
1 . 8 V *
[POWER]
T 1 . 8 V
Hold down
[PAUSE]
or
[FEED]
T 1 . 8 V *
[POWER]
1 6 . 2 V
[POWER]
Ø 8
[POWER]
Ø 8
[POWER]
A D J U S T
[POWER]
[POWER]
(25) Transmissive sensor A/D value display
Remove a few labels from the label paper and
place the backing paper in a manner so that
the sensor can detect it.
(26) Hold down the [PAUSE] or [FEED] key for 3
seconds or more.
(27) An asterisk
transmissive sensor adjustment is completed.
(28) Press the [POWER] key.
(29) Reflective sensor/transmissive sensor A/D
value without backing paper display
Remove the paper over the sensor.
(30) Hold down the [PAUSE] or [FEED] key for 3
seconds or more.
(31) An asterisk "*" is displayed when the sensor
adjustment without the baking paper is
completed.
(32) Press the [POWER] key.
(33) Battery voltage display
(34) Press the [POWER] key.
(35) Backlash step count 1 display
(36) Press the [POWER] key.
(37) Backlash step count 2 display
(38) Press the [POWER] key.
(39) System mode menu display
(Sensor display/adjustment)
(40) Hold down the [POWER] key for 3 seconds or
more.
(41) System mode menu display (Shutdown)
(42) Press the [POWER] key.
- 132 -
"*" is displayed when the