Self-Test Result Items - Toshiba B-EP Series Key Operation Specification

6.6.1.3

Self-test Result Items

(1) Maintenance counter values
Item
TOTAL FEED
TOTAL PRINT
FEED
FEED (1 to 4)
PRINT
PRINT (1 to 4)
232C ERR
SYSTEM ERR
* For details, refer to the section, "6.6.8.2.3 Maintenance Counter Clear"
Maintenance Counter
Total label distance covered
Label distance covered
Label print distance
RS-232C hardware error
count
System error count
Description
Total label distance covered
(cannot be cleared)
Total label print distance covered
(cannot be cleared)
Current label distance covered
Previous label distance covered
1 to 4
Current label print distance
Previous label print distance
1 to 4
RS-232C hardware error count
System error count
Counts whenever the paper feed motor is driven, for
example, to feed, print, or exit a label. (Also counts during
a reverse feed operation.)
When the power is turned off, a label distance of up to 50.0
cm may be rounded down and backed up.
When the label distance covered reaches the maximum
value, the
Otherwise, the total label distance covered cannot be
updated.
Counts while printing. (Counting is not performed during a
paper exit or reverse feed operation.)
When the power is turned off, a print distance of 5.5 m or
less is rounded down and backed up.
Counts when a parity error, overrun error, or framing error
occurs.
* When data of several bytes is transmitted continuously,
counting is performed per byte.
Counts when a No.20 system error described in the
section, "5.20 LCD MESSAGES AND LED INDICATIONS",
occurs.
- 57 -
0.0 to 320000.0 m
in units of 10 cm
0.0 to 320000.0 m
in units of 10 cm
0.0 to 320000.0 m
in units of 10 cm
0.0 to 320000.0 m
in units of 10 cm
0.0 to 320000.0 m
in units of 10 cm
0.0 to 320000.0 m
in units of 10 cm
0 to 255
0 to 15
Count Conditions
maintenance counter
Range
must be cleared.