Operation During Battery Charge By Ac Power Supply - Toshiba B-EP Series Key Operation Specification

7. OPERATION DURING BATTERY CHARGE BY AC POWER SUPPLY

This chapter describes the printer operations when the battery is charged by the AC adapter.
7.1 IN PRINTER POWER OFF STATE
(1) When the AC adapter is connected with the battery installed:
LCD
The external power source mark turns on and the battery level mark blinks.
When the battery is fully charged, both the external power source mark and the battery level
mark turn on.
LED
[STATUS] LED (Green)
[CHARGE] LED (Orange)
(2) When the AC adapter is connected without the battery installed:
LCD
The external power source mark and the battery level mark (Level 1) turn on.
LED
[STATUS] LED (Red)
[CHARGE] LED
* If the printer power is turned on under the above condition, a charge error will result.
(For details about the charge error, refer to "5.21 Charge Error Number List" of this
specification and Chapter 9. Error Processing of the External Equipment Interface
Specification (EAA-02465).)
................................... ON
Charging .................... ON
Full charge ................. OFF
......... ON
......... OFF
- 217 -