Toshiba B-EP Series Key Operation Specification page 224

(2) Assembly process test print mode
Power OFF
< 0 > S H U T D O W N
< 1 > D I A G N O S T I C
< 2 > M O D E
< 3 > A D J U S T
< 4 > T E S T
P R I N T C O N D I T I O N
F A C T O R Y
A U T O P R I N T ( T R A N )
A U T O P R I N T ( R E F L )
P R O C E S S
< 5 > T E S T
For details, refer to the section, "6.6.1.2 Self-test Items" in Chapter "6. SYSTEM MODE".
[PAUSE] [POWER]
[PAUSE]
[PAUSE]
S E T T I N G
[PAUSE]
S E T
[PAUSE]
P R I N T
[POWER]
[PAUSE] x6
T E S T
[PAUSE]
[PAUSE]
[PAUSE]
P R I N T
[FEED] + [PAUSE]
P R I N T
(1) Power off state
(2) While holding down the [PAUSE] key, press
the [POWER] key to turn the power on.
(3) System mode menu display (Shutdown)
(4) Press the [PAUSE] key.
(5) System mode menu display (Self-test)
(6) Press the [PAUSE] key.
(7) System mode menu display
(Mode setting)
(8) Press the [PAUSE] key.
(9) System mode menu display
(Fine adjustment value setting)
(10) Press the [PAUSE] key.
(11) System mode menu display (Test print)
(12) Press the [POWER] key.
(13) Test print condition parameter setting mode
(14) Press the [PAUSE] key six times.
(15) Assembly process test line print mode
(16) Press the [PAUSE] key.
(17) Assembly process automatic print mode
(transmissive sensor)
(18) Press the [PAUSE] key.
(19) Assembly process automatic print mode
(reflective sensor)
(20) Press the [PAUSE] key.
(21) Assembly process test pattern print mode
(22) While holding down the [FEED] key, press the
[PAUSE] key.
(23) System mode menu display (Test print)
- 215 -