Head Division Setting (Head Div) - Toshiba B-EP Series Key Operation Specification

6.6.2.2.2

Head Division Setting (HEAD DIV)

When a printing ratio per line is high, the value of this setting is changed to prevent print tone
from becoming lighter.
B-EP2
H E A D D I V
H E A D D I V
H E A D D I V
H E A D D I V
Default value: AUTO1 (none, 2 division or 3 division)
B-EP4
H E A D D I V
H E A D D I V
H E A D D I V
Default value: AUTO1 (none, 2 division, 3 division or 6 division)
<Supplemental Explanations>
When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
A U T O 1
[PAUSE]
A U T O 2
[PAUSE]
D I V 3
[PAUSE]
A U T O
[PAUSE]
A U T O 1
[PAUSE]
D I V 6
[PAUSE]
A U T O
[PAUSE]
- 71 -
Automatic selection from none, 2 or 3 division
(Print quality oriented)
Automatic selection from none, 2 or 3 division
(Print speed oriented)
* Supported on V1.0E or later.
Fixed to 3 division
Automatic selection from 2 or 3 division
Automatic selection from none, 2, 3 or 6
division
Fixed to 6 division
Automatic selection from 2, 3 or 6 division