Setting Accelation/Deceleration Rate -14 - Hanil FLETA 4 Operation Manual

4. Operation
4.8 Setting Accelation/Deceleration rate
1.Press the Setup/Enter (
2. Press the Left(
▶Accel setting mode : accel flashes on display
▶Decel setting mode: decel flashes on display
3. Press the up( ) or down (
4. Press the Setup/Enter (
4.9 Start/Stop/Short Spin
Starting a centrifugation
1. Check the all parameters are correct and the lid is closed.
2. Press the Start (
▶If the lid is not closed, it will not start.
Stopping a centrifugation
1. Press the Stop (
Short spin
1. Set the desired speed.[Refer to 4.5 Setting RPM/RCF]
2. Press the Start(
) button.
) or Right( ) button to select Aceel / Decel mode.
) buttons until the desired Accel/Decel step is displayed.
) button.
) button.
) button to stop a centrifugation.
) button more than 2sec.
A/S : +82-2-3452-8966 / techsupport@ihanil.com 14