Setting Acceleration/Deceleration; Start/Stop A Centrifugation - Hanil M15S User Manual

4. Operation

4.4 Setting Acceleration/Deceleration

1. Press the Setup/Enter button.
2. Press the Left or Right button until the Accel/Decel display(0) flashes.
▶ Accel rate setting mode: Accel display flashes(0).
▶ Decel rate setting mode: Decel display flashes(0).
3. Press the Setup/Enter button.

4.5 Start/Stop a centrifugation

[Start]
1. Check all parameters are correct.
2. Press the Start/Stop/Pulse button.
[Stop]
1. Press the Start/Stop/Pulse button to stop centrifugation.
▶ The centrifugation stops when the set run time has been reached.
Technical Support : +82-3452-8966 / techsupport@ihanil.com
15/22