Partitioning Data Media; Partitioning In Windows Embedded Standard 7 - Siemens SIMATIC IPC477E Operating Instructions Manual

Maintaining and servicing your device
7.5 Installing the software
7.5.2

Partitioning data media

7.5.2.1

Partitioning in Windows Embedded Standard 7

You will need to reconfigure the partitions after installing a new drive, to repair corrupt
partitions or to change the partitioning.
Partitioning of the SIMATIC IPC CFast card
The SIMATIC IPC CFast card for Windows Embedded Standard 7 comes configured with the
following default partitions:
Table 7- 1
Partition
First
Second
* Due to partitioning/formatting, the actual CFast capacity does not correspond to the
memory size specified on the SIMATIC IPC CFast card.
Table 7- 2
Partition
First
Second
* Due to partitioning/formatting, the actual CFast capacity does not correspond to the
memory size specified on the SIMATIC IPC CFast card.
Partitioning of the HDD or SSD
In the delivery state, the following partitions are configured on the HDD or SSD drive with the
Windows Embedded Standard 7 operating system:
Partition
Primary
Second
To restore the partitions to their original delivery state, we recommend the software
SIMATIC IPC Image & Partition Creator. Additional information is available in the
accompanying documentation.
100
32-bit versions of the operating system
Name Size of the card
8 GB
SYSTEM 6 GB
DATA Remainder
64-bit versions of the operating system
Name
SYSTEM
DATA
Name Partition size
< 100 GB
System 60 GB
Data Remainder
16 GB ≥ 30 GB
12 GB 25 GB
Remainder Remain-
der
Size of the card
16 GB ≥ 30 GB
13 GB 25 GB
Remainder Remainder
> 100 GB
100 GB
Remainder
Operating Instructions, 11/2020, A5E37455003-AF
File system
NTFS (not compressed)
NTFS (not compressed)
File system
NTFS (compressed)
NTFS (compressed)
File system
NTFS not compressed
NTFS not compressed
SIMATIC IPC477E