Partitioning Data Media; Setting Up The Partitions Under Windows Embedded Standard 2009 - Siemens SIMATIC IPC427C Operating Instructions Manual

11.3

Partitioning data media

11.3.1

Setting up the partitions under Windows Embedded Standard 2009

You need to set up the partitions on the CompactFlash card after installing a new drive, to
repair corrupt partitions or to change the partitioning.
Partitioning the Compact Flash card
The factory state of the Compact Flash card includes the following partitions:
Partition
1. Partition
2. Partition
* Due to partitioning/formatting, the actual Compact Flash capacity does not correspond to
the memory size specified on the Compact Flash.
Partitioning the hard disk
The following partitions are configured in the factory state of the hard disk with Windows
Embedded Standard 2009:
Partition
1. Partition
2. Partition
Partitioning the SSD drive
The following partitions are configured in the factory state of the SSD drive with Windows
Embedded Standard 2009:
Partition
1. Partition
2. Partition
To restore the original partition to its factory state, we recommend the software tool SIMATIC
PC/PG Image Creator. Detailed information about using this tool is available in the
manufacturer documentation.
SIMATIC IPC427C
Operating Instructions, 04/2009, A5E02414743-01
Name Size of the card
2 GB
SYSTEM 1536 MB
DATA Remainder *
Name
SYSTEM
DATA
Name
SYSTEM
DATA
4 GB 8 GB
2560 MB 5120 MB
Remainder * Remainder *
Size
25 GB
Remainder
Size
15 GB
Remainder
Maintenance and Service
11.3 Partitioning data media
File system
NTFS
(compressed)
NTFS
(compressed)
File system
NTFS (not compressed)
NTFS (not compressed)
File system
NTFS (not compressed)
NTFS (not compressed)
81