Extensive Functionality For High-Performance Operation - Danfoss VLT AutomationDrive FC 300 Series Selection Manual

5
Intelligent operation
reasons to choose
the VLT® AutomationDrive
1. Integrated Motion Controller
2. Robust four-quadrant control
3. Low noise operation
4. Easy PLC integration
5. High-efficiency operation
8
DKDD.PB.302.A8.02 | Content |
Extensive functionality for
high-performance operation
The VLT® AutomationDrive FC 300 Series is installed in a
wide variety of demanding applications and environments.
Regardless of your application's needs, you can count on
the VLT® AutomationDrive to deliver the capabilities for
long, worry-free operation in even the most sensitive of
environments.
Integrated Motion Controller
The performance of the VLT®
AutomationDrive FC 302 is enhanced
without complexity thanks to the
Integrated Motion Controller (IMC).
Providing motion functionality,
high-precision scaled positioning
and synchronizing tasks are simple
to perform with or without encoder
feedback, and commissioning is
fast and safe. IMC is configurable by
parameters – no special programming
language is required. No additional
modules or hardware are necessary.
Robust four-quadrant control
Applications, such as extruders
and separators, place heavy
demands on your AC drive. The
VLT® AutomationDrive can meet
your demands by providing reliable
operation in both motoring and
generating phases of operation.
Accurate torque controls, especially
through zero speed where the key
challenges lie, result in smooth and
continuous operation, saving both time
and money.
Low noise operation
Unfiltered AC drives produce
electromagnetic interference (EMI)
– both conducted and and emitted.
This interference can negatively impact
sensitive equipment. Built-in EMC/
RFI protection with screened motor
cables to Residential Category C1 (to
50 m) and C2 (to 150 m) provides the
ability to operate without additional
and expensive filters, further increasing
reliability and reducing interference
with sensitive electronics.
Easy PLC integration
VLT® AutomationDrive is compatible
with PROFINET, PROFIBUS DP-V1,
DeviceNet, EtherNet/IP, EtherCAT,
POWERLINK, CANopen and Modbus
TCP protocols. All Ethernet options
feature dual-ports with a built-in switch
or HUB (POWERLINK). Some of the
Ethernet technologies also support ring
topology for higher availability and fast
installation. Fieldbus configuration files,
pretested function blocks and add-on
instructions are available for easy, low-
risk, integration into your PLC system.
High-efficiency operation
New standards in Ecodesign have
been published focusing on energy
efficiency of AC drives and drive-motor
systems. As these standards increase
the focus on the efficiency of AC drives
worldwide, it's important to know
that, with the VLT® AutomationDrive,
you can count on having a foundation
to meet these coming requirements.
Using Danfoss ecoSmart™, you can
quickly determine the IE class of your
AC drive, the IES class of your specific
motor-drive system and the part-load
efficiency of your drive.