GW Instek LCR-800 Series User Manual page 69

LCR-800 Series User Manual
2) Option
Settings
Port:
Baudrate: After online, there are five Baudrates available for
DataBits:
Parity:
StopBits:
3) Set Filename
This filename setting is the route for saving test result.
Driver: Set driver
Directory:
File_Name:
There are three Ports available for selection including
Com1, Com2 and Com3. The default value is Com1.
selection including 9600, 19200, 38400, 57600 and
115200. The default value is 38400
There are 8 bits of Data bits and User can not change it.
None. User can not change it.
There is only 1 Bit of StopBits, and User can not change it
(Figure 9-7).
Figure 9-7
Set directory
Set file name with 4 alphabets or 4 numbers input.
65