4-4.Menu Functions - GW Instek LCR-800 Series User Manual

LCR-800 Series User Manual
4-4. Menu Functions
All the LCR Meters' programmable functions are controlled by the easy to use
menu displays. User can enter the menu mode by selecting the MENU key that
calls up four top level menus, OFFSET, SORT, SETTING and CALBRAT.
Each one of these is comprised of a sub menu list whose functions are described
in detail below. User can enter one of four functions by pressing the
corresponding function key (just adjacent LCD monitor, see figure 4-2).
4-4-1. Primary & Secondary Display
CAP. R/L OFFSET
SET SORT
SET PARAMETER
CALIBRATION
Figure 4-2: four main menu screen
For the LCR Meters, four combinations of two parameters can be measured and
displayed simultaneously. One referred to the "Primary Display" (displayed
first) and the other to the "Secondary Display". Depending on the component
type the primary and secondary display could be L & Q, C & D, C & R or R
and Q. The parameter can be chosen by the user through F3 key as shown in
Figure 4-3.
OFFSET
SORT
SETTING
CALBRAT
EXIT
11
Press F1 key
to the zeroing
menu
Press F2 key
to the bin sort
menu
Press F3 key
to the utility
menu
Press F4 key
to the
calibration
menu
Press MENU key
to exit menu screen