Maintenance - GW Instek LCR-800 Series User Manual

LCR-800 Series User Manual

7. MAINTENANCE

This section includes the basic maintenance information for the LCR Meters.
7-1. Cleaning
Remove the AC input power (disconnect and remove the power cord) from the
LCR Meters before attempting to clean the instrument.
To clear the LCR Meters, use soft cloth dampened in a solution of mild detergent
and water. Do not spray cleaner directly onto the instrument, since it may leak
into the cabinet and cause damage.
Do not use chemicals containing benzine, benzene, xylene, acetone, toluene, or
similar solvents.
Do not use abrasive cleaners on any portion of this equipment.
7-2. Battery Replacement
A replaceable 3V lithium battery (BR-2/3A type) supplies the backup power of
non-volatile memory for the LCR Meters. This battery probably needs to be
replaced after using for 3 years.
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Discard used batteries
according to the manufacturer's instructions.
43