GW Instek LCR-800 Series User Manual page 19

LCR-800 Series User Manual
DELTA%
The "DELTA%" shows the percent deviation of the measured L, C, or R value
from a stored NOMINAL VALUE. The sign of deviation is indicated.
DELTA
The LCR difference is similar to the DELTA% except that the deviation is shown
in suitable units (ohms, henries, etc).
L 1.2345H
Q 0.6789
F : 1.000 kHz
V : 1.000 V
AUTO MANU
4-4-4. Nominal Value
Allows entry of a "Nominal Value" for the primary parameter which is the basis
for the measurement result in "DELTA" or "DELTA %". Accepts numerical entry
up to five digits with decimal. Units are depended on which measurement
displays selected.
TESTING
R.H OFF
C.V OFF
INT.B OFF
Figure 4-5. Types of measurement display
SPEED
SLOW
DISPLAY
VALUE
MODE
L/Q
CIRCUIT
SERIES
MENU
15
Press F2 key to select the
three different measuring
display ("VALUE",
"DELTA%", or "DELTA").