GW Instek LCR-800 Series User Manual page 70

LCR-800 Series User Manual
File_Num:
Test Result File_Name File_Num
1-10000
10001-20000
20001-30000
30001-40000
40001-50000
50001-60000
99980001-99990000 LCR_ 9999 LCR_9999.Txt
FileNum Reset (refer to the following figure): File_Num is 0001.
Ps. File_Num will be continued from last file number of test result. If
last file number is end at 0006, next file number is started from 0007
when re-power on the unit.
If want to start from 0001, reset the FileNum (refer to Figure 9-8).
4) Data
Result : Display test results. When the test results data reaches to the
number of 10000 will be stored in a file automatically. If want
to store the data less than the number of 10000, must exit the
LCR-VIEW first (the data can be stored automatically), then
execute again the LCR-VIEW to start another counting of test
Set 4 codes of file numbers from 0001 to 9999. When
the test results data reaches to the number of 10000 can
be stored with a file number.
LCR_ 0001
LCR_ 0002
LCR_ 0003
LCR_ 0004
LCR_ 0005
LCR_ 0006
|
Figure 9-8
66
Filename
LCR_0001.Txt
LCR_0002.Txt
LCR_0003.Txt
LCR_0004.Txt
LCR_0005.Txt
LCR_0006.Txt