GW Instek LCR-800 Series User Manual page 18

LCR-800 Series User Manual
The measured results of the LCR Meters can be shown on the LCD monitor in
three ways: VALUE, DELTA%, or DELTA. User can press F2 key to select the
appropriate item for measurement.
VALUE
The LCD monitor will display the measured value of both the primary and
secondary parameter, shown with decimal and units. The resolution of primary
display (L, C, or R) is five digits. The resolution of secondary display (D, Q or R
with C) is four digits. The message "TESTING" is displayed when a test is in
process.
14