GW Instek LCR-800 Series User Manual page 51

LCR-800 Series User Manual
!
Press F3 key to select FAST, SLOW or MEDI shown as Figure 8-4 below.
For further details, please refer to 4-4-5.
SET BIN
MODE:C/D
SPEED
BIN
F:1.0000kHz MANU
V:1.000 V
RANGE:1
DELAY:00000mS AVG : 1
DISPLAY setting:
!
Press F1/F2 key to select the white inverted characters "DISPLAY".
! Press F3 key to select BIN, VAL or OFF shown as Figure 8-5 (When the
BIN is selected, BIN1~BIN13 represents PASS, while PHI, PLO, and SREJ
represents FAIL result. The VAL is to display test value while the OFF
represents as non-display.)
The display speed for above three selections is different from one another.
SET BIN
MODE:C/D
SPEED:SLOW
BIN
F:1.0000kHz MANU
V:1.000 V
RANGE:1
DELAY:00000mS AVG : 1
F setting (FREQUENCY):
! Press F1/F2 key to select the white inverted characters "F".
!
Key-in testing frequency through panel keyboard.
Figure 8-4
BIN SUM
CIRCUIT:SER.
:SLOW DISPLAY:BIN
C D
INT.B OFF
C.V : OFF
Figure 8-5
BIN SUM
CIRCUIT:SER.
DISPLAY :BIN
C D
INT.B OFF
C.V : OFF
SET
EXIT
SET
EXIT
47
Press F1. F2
key to the
SPEED
Press F3 key
to the FAST
SLOW.MEDI
Press F1.F2
key to the
DISPLAY
Press F3 key
to the BIN
VAL.OFF