Option 2 (Rs-232, For Lcr-816/817/819 Only) - GW Instek LCR-800 Series User Manual

LCR-800 Series User Manual
9. OPTION 2 (RS-232, for LCR-816/817/819)
9-1. On-line Procedure
1) Power on the LCR METER.
2) Power on the RS232 function of LCR METER. With the steps as
follows (Figure 1):
! Press MENU key.
! Press F2 key to select "SORT" function.
! Press F3 key to select "OPTION 2" function.
! Press F1 key to select "RS232" ON.
3) Run PC LCR-VIEW Program.
4) Check the contents of the Message area under the LCR-VIEW to
make sure the Online Procedure has been well done. If not, select the
setting items above the LCR-VIEW to change the Com port and make
connection again until it is online. Please refer to Figure 9-2, 9-3, 9-4.
C 13.450uF
D .1652
TESTING
F :1.0000 kHz R.H OFF
V :1.000 V C.V OFF
AUTO MANU INT.B OFF
CAP. C/D OFFSET
SET SORT
SET PARAMETER
CALIBRATION
SPEED
SLOW
DISPLAY
VALUE
MODE
C/D
CIRCUIT
Press menu
SERIES
key
MENU
Press F2 key
OFFSET
to the sort
SORT
61
SETTING
CALBRAT
menu