Bin Setting Conditions - GW Instek LCR-800 Series User Manual

LCR-800 Series User Manual
MODE setting
!
Press F1.F2 key to select the white inverted characters "MODE".
!
Press F3 key to select C/D or C/R or L/Q or R/Q shown as Figure 8-2
below. For further detailed description, please refer to 4-4-1.
SET BIN
MODE :C/D
SPEED:SLOW DISPLAY:BIN
C
BIN
F:1.0000kHz MANU
V:1.000 V
RANGE:1
DELAY:00000mS AVG : 1
CIRCUIT setting:
!
Press F1/F2 key to select the white inverted characters "CIRCUIT".
!
Press F3 key to select SER or PAR shown as Figure 8-3 below. For further
details, please refer to 4-4-2
SET BIN
MODE:C/D
SPEED:SLOW DISPLAY:BIN
C
BIN
F:1.0000kHz MANU
V:1.000 V
RANGE:1
DELAY:00000mS AVG : 1
SPEED setting:
!
Press F1/F2 key to select the white inverted characters "SPEED".
Figure 8-2
BIN SUM
CIRCUIT:SER.
D
INT.B OFF
C.V : OFF
Figure 8-3
BIN SUM
:SER.
CIRCUIT
D
INT.B OFF
C.V : OFF
SET
C/R.L/Q.R/Q
EXIT
SET
EXIT
46
Press F1.F2
key to the
mode item
Press F3 key
to the C/D.
Press F2 key
to the
CIRCUIT
Press F3 key
to the SER.
PAR