Symbols On The Product - SMA MEDIUM VOLTAGE POWER STATION 500SC-JP System Manual

SMA Solar Technology AG
Symbol Explanation
There is an error in the inverter.
An error has occurred in the communication with the inverter.
3.14

Symbols on the Product

The following gives an explanation of all the symbols found on the devices of the MV Power Station and on the type
labels.
Symbol Designation
CE marking
Protection class I
Degree of protection IP54
Beware of a danger zone
Warning regarding dan-
gerous voltage
Beware of hot surface
Use hearing protection
Observe the documentation Observe all documentation supplied with the product.
System Manual
Explanation
The product complies with the requirements of the applicable EU di-
rectives.
All electrical equipment is connected to the grounding conductor sys-
tem of the product.
The product is protected against interior dust deposits and splashing
water from all angles.
This warning symbol indicates a danger zone. Be particularly vigilant
and cautious when working on the product.
The product operates at high voltages. All work on the product must
be carried out by qualified persons only.
The product can get hot during operation. Avoid contact during oper-
ation. Allow the product to cool down sufficiently before carrying out
any work. Wear personal protective equipment such as safety
gloves.
The product generates loud noises. When working on the product,
wear hearing protection.
3 Product Overview
MVPS22JP-SH-en-11 39