Cable Installation; Labeling - AT&T 75 Wiring Manual
Hide thumbs
Also See for 75:
- Wiring diagram (345 pages) ,
- User manual (103 pages) ,
- User manual (45 pages)
Table of Contents
Advertisement
66-TYPE HARDWARE
Cable Installation
Labeling
The port label shown in Figure 4-20 is installed on both ends of the 25-pair switch cables
that connect to the Trunk/Auxiliary Field and the Distribution Field. The blue/yellow
building and floor labels are optionally used for cables that connect from the equipment
room to a site or satellite located on another floor or in another building. An additional
yellow label is shown. This yellow label is used for auxiliary circuits that connect to the
Trunk/Auxiliary Field or SSI circuits that connect to an Applications Processor.
The blue/yellow label is used on 25-pair station cables that connect to site or satellite
closets.
Figure 4-20. Equipment Room Cabling Labels
CABLE/JACK/BUILDING LABEL ORDERING INFORMATION
4-42
Description
Qty. Per. Code
201A Labels
34 Sheets
Comcode
103 969 994
Advertisement
Chapters
Table of Contents
