AT&T 75 Wiring Manual page 562

66-TYPE HARDWARE
Installation—FCC Registered Recorded Announcement Equipment
1. Determine port assignment of feature from Announcement Form:
2. Install jumper wires at cross-connect field.
3. Install recorded announcement equipment per manufacturer's instructions.
4.
Connect 2-pair line cord (modular plug at one end) from information outlet to
recorded announcement equipment (see Figure 4-88).
5. Administer per AT&T System 75 and System 75 XE Implementation and A T & T
System 75 and System 75 XE Administration.
Figure 4-88. Connections for FCC Registered Equipment Provided for Recorded
Announcement/Dial Dictation Equipment (Analog Access)
4-136
EXAMPLE: Port Number B 0 2 0 1
Circuit
Carrier Slot