201A Labels; Routing Cable Guidelines - AT&T 75 Wiring Manual

The yellow/blue label is used on 25-pair station cables that connect to site or satellite
closets.
LABEL NAME
PORT CABLE
BUILDING
FLOOR
AUXILIARY
CABLE
SITE OR
SATELLITE
Figure 2-41. Equipment Room Cabling Labels
CABLE/JACK/BUILDING LABEL ORDERING INFORMATION
Figure 2-42 shows the proper label installation on a 25-pair cable connector (see Note).
Note: The label should be installed near the rear of the connector as shown so that it
will not be obscured by any of the switch cabinet, cable access panel, or connector
module connector retainers. It can also be installed on the skin of the cable near the
connector.
Figure 2-42. Self-Stick Label Installation on 25-Pair Cable Connector

Routing Cable Guidelines

The following guidelines should be followed when installing the equipment room cabling.
Following these guidelines will make optimum use of the cable slack managers and make
future cabling additions and changes easier.
RANGE
1A1-1A10, 1B1-1B20,
1C1-1C20, 1D1-1D20,
1E1-1E20
FIELD IDENTIFIED
FIELD IDENTIFIED
FIELD IDENTIFIED
A-F AND/OR
FIELD IDENTIFIED
Description Qty. Per Code

201A Labels

34 sheets
Z100-TYPE HARDWARE
SAMPLE LABEL
PURPLE
BLUE/YELLOW
YELLOW
BLUE/YELLOW
Comcode
103 969 994
2-61