Emc Test Results (Emission) - Danfoss VLT Refrigeration Drive FC 103 Design Manual

System Integration

3.2.2 EMC Test Results (Emission)

The following test results have been obtained using a system with a frequency converter (with options if relevant), a
screened control cable, a control box with potentiometer, as well as a motor and motor screened cable.
3 3
RFI filter type
Standards
and
requirements
H1
1.1–22 kW 220–240 V
1.1–45 kW 200–240 V
1.1–90 kW 380–480 V
H2/H5
1.1–22 kW 220–240 V
1.1–3.7 kW 200–240 V
5.5–45 kW 200–240 V
1.1–7.5 kW 380–480 V
11–90 kW 380–480 V
HX
1.1–90 kW 525–600 V
Table 3.4 EMC Test Results (Emission)
HX, H1 or H2 is defined in the type code pos. 16–17 for EMC filters.
HX – No EMC filters built in the frequency converter (600 V units only).
H1 – Integrated EMC filter. Fulfil Class A1/B.
H2 – No additional EMC filter. Fulfil Class A2.
H5 – Marine versions. Fulfil same emissions levels as H2 versions.
42
VLT
EN 55011 Class B
Housing, trades,
and light
industries
EN/IEC 61800-3 Category C1
First environ-
ment Home
and office
50
50
50
No
No
No
No
No
No
Danfoss A/S © 08/2015 All rights reserved.
®
Refrigeration Drive FC 103
Conducted emission
Cable length [m]
Class A Group Class A Group 2
1 Industrial
Industrial environ-
environ- ment
ment
Category C2 Category C3
First environ- Second environ-
ment Home ment Industrial
and office
150 150
150 150
150 150
No 25
No 5
No 25
No 5
No 25
No No
Radiated emission
Cable length [m]
Class B Class A Group
Housing, trades, 1
and light Industrial
industries environment
Category C1 Category C2
First First
environment environment
Home and Home and
office office
No Yes
No Yes
No Yes
No No
No No
No No
No No
No No
No No
Class A Group
2
Industrial
environment
Category C3
Second
environment
Industrial
N/A
Yes
Yes
N/A
No
No
No
No
No
MG16G202