Appendix - Selected Drawings; Mains Connection Drawings - Danfoss VLT Refrigeration Drive FC 103 Design Manual

Appendix - Selected Drawing...

8 Appendix - Selected Drawings

8.1 Mains Connection Drawings

This collection of drawings is intended to aid planning for
access in the design phase.
Refer to the operating instructions for installation
procedures including:
•
Safety requirements.
•
Step-by-step installation procedures.
•
Alternative configurations.
•
Extra drawings.
Mains connection for enclosure sizes A2 and A3
8 8
Illustration 8.1 Support Bracket
Mains connection for enclosure sizes A4/A5
Illustration 8.2 Mains and Grounding without Disconnector
140
®
VLT Refrigeration Drive FC 103
Illustration 8.3 Mains and Grounding with Disconnector
When a disconnector is used (enclosure sizes A4/A5),
mount the PE on the left side of the frequency converter.
Illustration 8.4 Mains Connection Enclosures Sizes B1 and B2
Danfoss A/S © 08/2015 All rights reserved. MG16G202