Danfoss VLT Refrigeration Drive FC 103 Design Manual page 114

Type Code and Selection
Parameter
Parameter 14-00 Switching Pattern
Parameter 14-01 Switching Frequency
Parameter 14-55 Output Filter
Parameter 14-56 Capacitance Output
Filter
Parameter 14-57 Inductance Output
Filter
Table 6.15 Parameter Settings for Sine-wave Filter Operation
6 6
112
®
VLT Refrigeration Drive FC 103
Setting
[1] SFAVM
Set according to the individual filter. Listed on filter product label and in output filter manual.
Sine-wave filters do not allow lower switching frequency than specified by the individual filter.
[2] Sine-wave filter fixed
Set according to the individual filter. Listed on filter product label and in output filter manual
(only required for flux operation).
Set according to the individual filter. Listed on filter product label and in output filter manual
(only required for flux operation).
Danfoss A/S © 08/2015 All rights reserved. MG16G202