Prox Tags; Arc Reporting; Speech Dialler - Cooper Security i-on40 Programming Reference Manual

i-on40
3. Press each button on the panic alarm in turn. Make
sure the display reports each button correctly.
4. Press X to end the test.

Prox Tags

To test a proximity tag:
1. Select Test – Prox Tags from the Installer Menu.
The display instructs you to present the prox tag to
the keypad.
2. Hold the prox tag up to the keypad.
The display identifies the prox tag and shows the user
that owns it.
3. Press X to end the test.

ARC Reporting

To send a test call to an ARC number:
1. Select Test – Comms Tests – ARC Reporting from the
Installer Menu.
The bottom line of the display shows "Send Test Call"
2. Press >.
The bottom line of the display shows "Number 1".
There are two numbers to chose from.
3. Press > until the bottom line shows the number you
wish to call.
4. Press > to start a test call.
The keypad display shows the progress of the call:
"Dialling", then "Connected", "Negotiating" followed
by "Call Successful". Check with the receiving centre
that the test call arrived. If the call fails the display
will show "Call failed" followed by a reason.

Speech Dialler

To send a test call to a speech dialler number:
1. Select Test – Comms Tests – Speech Dialler from the
Installer Menu.
The top line of the display shows "Key in tel no:"
Testing
Page 89