Cooper Security i-on40 Programming Reference Manual page 89

i-on40
Wired Sirens
Loudspeakers
Wired Keypads
should be silent. Note that both
siren and strobe should operate.
This option allows you to operate all
outputs programmed as "Siren" and
"Strobe". Press > to turn the
outputs on. Press > again to turn
the outputs off.
With this option you can test any
loudspeakers connected to the
control unit. Press > to generate an
alarm tone from the loudspeakers.
Press > again to turn the
loudspeakers off.
Use this option to test the sounders
on the wired keypads. Press > to
generate an alarm tone from all
keypads connected to the control
unit. Press > to turn the wired
keypad sounders off again.
Testing
Page 85