1. Manuals
  2. Brands
  3. Cooper Security Manuals
  4. Security System
  5. i-On 40
  6. Administrator's and user manual

Cooper Security i-on40 Administrator's And User Manual

Hide thumbs Also See for i-on40:
Table of Contents

Advertisement

Quick Links

See also: Administrator's Manual , User Manual

Advertisement

Table of Contents
loading

Related Manuals for Cooper Security i-on40

Summary of Contents for Cooper Security i-on40

  • Page 2 & i-onEX Range © Cooper Security Ltd. 2012 IN NO EVENT WILL COOPER BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL , OR INDIRECT LOSS OR DAMAGE, INCIDENTAL DAMAGES, STATUTORY DAMAGES, EXEMPLARY DAMAGES, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF ANTICIPATED SAVINGS, LOSS OF BUSINESS OR OPPORTUNTIY, LOSS OF GOODWILL OR INJURY TO REPUTATION, LIQUIDATED DAMAGES OR LOSS OF USE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.

  • Page 3: Table Of Contents

    & i-onEX Range Contents 1. Introduction ..............1 Setting and Unsetting ............3 Alarms and Reset ................. 3 Security Levels ................4 Partitions ..................4 24 Hour Alarms ................4 Communications ..............5 Security Grade ..............5 Controls and Displays ............6 Controls: ..................
  • Page 4 & i-onEX Range Viewing the Log ..............61 Testing the System ............. 62 Sirens & Sounders..............62 Keypad ..................65 Walk test .................. 66 Outputs ..................69 Remotes and Two-way Keyfobs ........... 70 Radio Hold Up Alarms ..............72 Proximity Tags ................

  • Page 5: Compliance Statement

    & i-onEX Range Compliance Statement The i-on50EX and i-on160EX: Are suitable for use in systems designed to comply with PD6662:2010 at Grade 2, Grade 3 and environmental class Are suitable for use in systems designed to comply with the requirements of EN50131-3 at Grade 2, Grade3 and environmental class II.
  • Page 6 & i-onEX Range This page is intentionally blank. Page vi...

  • Page 7: Introduction

    & i-onEX Range 1. Introduction At the heart of the i-on range systems are the control units, their expanders and keypads. The control unit contains the main processing unit, the power supply and stand-by battery. The stand-by battery can keep the alarm system going for several hours if the mains supply fails.
  • Page 8 1. Introduction i-on40 & i-onEX Range The control unit and expanders also provide sets of connectors for outputs, which the installer can use to link the control unit to siren/strobe units or other equipment. 1. Two button Hold Up Alarm with tilt switch.

  • Page 9: Setting And Unsetting

    & i-onEX Range 1. Introduction This guide covers four types of i-on control unit: the i-on30EX, i- on40, i-on50EX and the i-on160EX. A complete system using one of these control units comprises: Control unit i-on30EX i-on40 i-on50EX i-on160EX Fixed detectors...

  • Page 10: Security Levels

    “partitions”. The i-on160EX can have up to 20 partitions, the i-on50EX up to five, the i-on30EX and i-on40 up to four. Users can set and unset each partition completely independently of all the others. Individual users can be given access to one or more partitions: if they have no access to a partition then they cannot set or unset that partition.

  • Page 11: Communications

    Your system may be either Grade 2 or Grade 3. Ask your installer which Grade you have since a Grade 3 system operates slightly differently from a Grade 2 system. Note that the i-on30 and i-on40 can only be configured as Grade 2 systems. Page 5...

  • Page 12: Controls And Displays

    1. Introduction i-on40 & i-onEX Range Controls and Displays Figure 2 shows the controls and displays available on the keypads. 1. LCD display . 2. Programming keys. Also used to gain access to programming menus and acknowledge alerts. 3. Navigation key 4.

  • Page 13: Displays

    & i-onEX Range 1. Introduction If the bottom line of the display shows “On” “Off” “Yes” “No” “I” (for include) “O” (for omit) then pressing this key changes the value to its opposite. When editing names moves the cursor to the right.

  • Page 14: Users

    Master User This user can add any other user to the system, edit them, or remove them. There is always (at least) one master user: User 001 (User 01 on i-on30EX and i-on40.) Master users can create or delete all other user types, including other master users.
  • Page 15 & i-onEX Range 1. Introduction user‟s type. In a partitioned system all master users always belong to all partitions. Administrator This user is similar to a master user, but in a partitioned system is limited to one or more partitions. Admin...

  • Page 16: Identifying Users

    The control unit identifies each user internally by a unique number. The number is in the range 01 to 49 for the i-on30EX and i-on40, 001 to 099 for the i-on50, and 001 to 499 for the i- on160EX. When a Master User or Administrator adds or edits other users the keypad shows user numbers as “User nnn”, for...

  • Page 17: Proximity Tags

    User does not have any tag or other device registered to their account. Cooper Security Limited recommend that you change the default access code as soon as possible (see page 42). Codes 0000 (or 000000) to 9999 (or 999999) are available but Cooper Security Limited recommends that you avoid easily memorised codes such a 0000, 999999 or 654321.

  • Page 18: Remote Controls

    1. Introduction i-on40 & i-onEX Range Remote Controls A remote control is a transmitter that you can attach to a key ring. The remote control has four buttons and a small LED that glows when it transmits a signal. Note that to prevent accidental operation the user must hold a button down for at least two seconds to ensure a transmission.

  • Page 19: Radio Hold Up Alarms (Hua)

    & i-onEX Range 1. Introduction Unset Set LED Unset LED Query LED Part set LED Query Part Set (programmable) Figure 4. Two-Way Key Fob Buttons Operating the buttons To ensure that the fob does not accidentally operate while it is in your pocket, the buttons are deliberately slow to respond to pressure.
  • Page 20 1. Introduction i-on40 & i-onEX Range Lock Figure 5. HUA Buttons HUA With A Two-Way Key Fob It is possible to start a Hold Up Alarm from a two-way key fob. However, the Installer must enable this within the control unit.

  • Page 21: Alarms

    & i-onEX Range 2. Alarms The table below shows the different kinds of alarms possible. Type of Signal Started by: Alarm Intruder Loud warbling Normal alarm or entry route zone tone from siren. activated when system is set. 24 hour zone activated at any time.
  • Page 22 2 Alarms i-on40 & i-onEX Range If you return to the system while the sirens are running you can silence the siren as follows: Make sure it is safe to enter the premises: Either key in your access  ...

  • Page 23: If You Cannot Reset The System

    & i-onEX Range 2. Alarms If you return to the control unit after the sirens have stopped and key in your access code then the red LEDs around the navigation keys glow to tell you that an alarm has occurred.

  • Page 24: Accidental Alarms

    2 Alarms i-on40 & i-onEX Range The number displayed on the bottom line is a special code (“4321” is just an example). Note this code down, you will need it when you talk to the alarm company. Press  to clear the message and the display returns to normal.

  • Page 25: Acknowledging A Speech Message

    & i-onEX Range 2. Alarms The control unit may be programmed to send the speech message to up to four telephone numbers. Acknowledging a Speech Message If the control unit has Call Acknowledge enabled (ask your installer), then the person receiving speech messages from the alarm system can control the link by pressing buttons on their telephone key pad.

  • Page 26: Technical Alarms

    2 Alarms i-on40 & i-onEX Range Either: Press  to acknowledge that you have read the alert.  The system will show you any  other alerts that may be active. If there are no other alerts the keypad will return to its‟ standby...
  • Page 27 & i-onEX Range 2. Alarms Note that if the technical zone detector is still active when you try to reset the system then the keypad will show the message “RESET FAULTS”. You must make sure that the detector is not active before you can reset a technical alarm.

  • Page 28: Setting And Unsetting

    & i-onEX Range 3. Setting and Unsetting There are two main ways of setting and unsetting your alarm system: either from a keypad or from a remote control. This chapter is split into two halves, dealing with each of those methods in turn.

  • Page 29: Setting

    & i-onEX Range 3. Setting and Unsetting a door, and then identifying yourself at a keypad with either an access code or by presenting a proximity tag. Setting 1. Starting to Set Do this: The display shows: Make sure the system is idle.
  • Page 30 3. Setting and Unsetting i-on40 & i-onEX Range 2. Selecting What to Set: Part Setting Systems Do this: The display shows: ↕ The bottom line of the display    shows the first item in the setting options menu.
  • Page 31 & i-onEX Range 3. Setting and Unsetting menu (or third if a part set is available). ↕   Press   The bottom line of the display shows the state of the first partition: U = Unset S = Full Set P = Part Set ↕...
  • Page 32 3. Setting and Unsetting i-on40 & i-onEX Range Note: If a Partition is Full Set then you cannot go directly to Part Set. You must unset the Partition first. If the Partition is Part Set then you cannot go directly to Full Set.

  • Page 33: Final Door Set

    & i-onEX Range 3. Setting and Unsetting tone then there is a fault, for example an active detector. Leave by the designated exit door. Remember to close the door. At the end of the exit time   the system sets.

  • Page 34: Lock Set

    3. Setting and Unsetting i-on40 & i-onEX Range door is closed). The top line of the display shows the part of the system being set, the bottom line shows “Final Door Set”. Leave by the designated exit door. Remember to close the door.

  • Page 35: If The System Will Not Set

    & i-onEX Range 3. Setting and Unsetting (The keypad may show the name   of the installer instead.) In a part set system, one of four LEDs glows to show which part of the system is set. Note: The installer may have...

  • Page 36: Other Reasons Why The System May Not Set

    3. Setting and Unsetting i-on40 & i-onEX Range SETTING FAULTS Z041 Back door Figure 6. Keypad Display Showing Active Zone Investigate the zone listed on the display and see if you can rectify the fault. If your system has been programmed to then you can “omit”...

  • Page 37: Unsetting The System Using A Keypad

    & i-onEX Range 3. Setting and Unsetting Override by: Message Meaning Grade 2 Grade 3 An expander or keypad Installer Installer  has a fault, or the cabling between parts of the system has a fault. The AC supply has...
  • Page 38 3. Setting and Unsetting i-on40 & i-onEX Range Identify Yourself Either key in your access code   As you key in your code the display shows a “*” for each digit. OR present your proximity tag. How Do I Know The System Is Unset?

  • Page 39: Using Radio Keypads And Remote Controls

    & i-onEX Range 3. Setting and Unsetting Using Radio Keypads and Remote Controls. Using a Radio Keypad Setting Secure all your windows and doors. Make sure the system is in standby, and that you can hear the warning tones from the sounders.

  • Page 40: Using A Remote Control

    3. Setting and Unsetting i-on40 & i-onEX Range Proximity tag sensor “ Transmit” LED Figure 7. Radio Keypad Note: The radio keypad does not show the status of the alarm system at all. The left hand “Transmit” LED glows only to show that the keypad is sending a command to the control unit.

  • Page 41: If The System Will Not Set By Remote Control

    & i-onEX Range 3. Setting and Unsetting The keypad sounds the exit warning tone. Complete setting using the method programmed by the Installer (see “3. Finishing Setting” on page 26). Unsetting Enter by the designated entry door. Press on your remote control.

  • Page 42: Setting The System

    3. Setting and Unsetting i-on40 & i-onEX Range Setting the System Press and The setting LED flashes red three hold: times. The system sets. The control unit sends a message to the fob. Note: If the Installer has programmed the system to complete...
  • Page 43 & i-onEX Range 3. Setting and Unsetting Press and The un-setting LED flashes red three hold: times. The system unsets. The control unit send a message to the fob that there has been an alarm. All four LEDs glow red for three seconds.

  • Page 44: Administration

    & i-onEX Range 4. Administration To make changes to the way your system works you must enter the Menu. Your degree of access to the Menu depends on what type of user you are: Master User, Admin User or Normal User.

  • Page 45: Editing Text

    & i-onEX Range 4. Administration Press  (if necessary several   times) to leave the Menu. (If you do not press any keys on the keypad for 60 seconds then the display returns to the standby screen.) The rest of this chapter describes each of the main options in the Menu.

  • Page 46: Omitting Zones

    4. Administration i-on40 & i-onEX Range Omitting Zones You may wish to prevent a zone causing an alarm. For example, if your garage door is protected by a detector, but you wish to leave it unlocked for the delivery of a parcel, you may wish to omit that detector when you set the rest of the alarm system.

  • Page 47: Users

    Users menu: A Master User can: Add or delete users with access to any partition, except for User 001 (or 01 for i-on30EX and i-on40). They can also assign proximity tags, remotes and radio HUAs while adding a new user.

  • Page 48: Editing Existing Users

    Add or delete users with access to any of the Admin User's partitions, except for Master users and User 001 (or 01 for i- on30EX and i-on40). They can also assign proximity tags, remotes and radio HUAs while adding a new user.
  • Page 49 “003” on an i-on50EX or i- on160EX, or “03” on an i-on40 or i-on50EX.) Press  .   The bottom line shows: 10.

  • Page 50: User Types

    4. Administration i-on40 & i-onEX Range User Types Use this option to change a user‟s Type. Note: You cannot change the Type of a Master User. Make sure the display shows   the standby screen. Press   Key in your access code (or ...

  • Page 51: Type (Not U01, U001)

    & i-onEX Range 4. Administration 11. Press .   The bottom line of the display shows the current user type. See page 8 for a description of the user types available. A “*” at the beginning of the line is there to remind you of the current type if you scroll away.
  • Page 52 4. Administration i-on40 & i-onEX Range Press  or  to display the   user you wish to edit. (Alternatively, if you already know their user number, you can key that in and the display will show that user immediately.)

  • Page 53: Access Code

    “All Partitions” (hint, it’s between Partition 1 and Partition 20 on the i-on160EX, Partition 1 and Partition 4 on the i-on30EX and i-on40, and between Partition 1 and Partition 5 on the i-on50EX). Press to change the “Yes”...
  • Page 54 4. Administration i-on40 & i-onEX Range Press  or . until the  bottom line of the display  shows your own user name or number. Press .   Press  or . until the bottom  line of the display shows: ...
  • Page 55 & i-onEX Range 4. Administration Proximity Tags No user can change or delete any other user‟s proximity tag. (A Master User or Admin User can register a proximity tag for a new user when they first add the user to the system, see page 56.)

  • Page 56: Code

    4. Administration i-on40 & i-onEX Range If you are a Normal User: Press .   Press  until the display  shows:  Press .   Note: If you already have a prox tag allocated to you then the screen will display “Delete...
  • Page 57 & i-onEX Range 4. Administration Make sure the display shows   the standby screen. Press   Key in your access code (or  present a tag).  Press  .   If you are a Master or Admin User: (otherwise go to step 6) Press .

  • Page 58: Remote

    4. Administration i-on40 & i-onEX Range Press . The display asks you to press one of the buttons on the remote control or two-way  keyfob.  Note: If you already have a device allocated to you then the screen will display “Delete Remote?”.
  • Page 59 & i-onEX Range 4. Administration Radio Hold Up Alarms (HUA) No user can change any other user‟s radio HUA. (A Master User or Admin User can register a radio HUA for a new user when they first add the user to the system, see page 56.) Any user except a Guard or Set Only user can register a radio HUA for themselves.

  • Page 60: Hold Up Alarm

    4. Administration i-on40 & i-onEX Range If you are a Normal User: Press .   Press  until the display shows:   Press . The display asks you to press both of the buttons on the Hold Up Alarm.
  • Page 61 & i-onEX Range 4. Administration If you have a radio HUA and want to know who it belongs to then use the Test – User Hold Up Alarms menu option, see page 61 . Deleting Remote Controls, Two-way Keyfobs...

  • Page 62: Adding Users

    4. Administration i-on40 & i-onEX Range If you are a Normal User: Press .   Press  until the display  shows the device you wish to  delete, for example: Press . The bottom line of the display ...
  • Page 63 & i-onEX Range 4. Administration To add a new user: Make sure the display shows   the standby screen. Press   Key in your Master User or  Admin access code (or present  a suitable tag).
  • Page 64 4. Administration i-on40 & i-onEX Range Press  or  to scroll through   the list of partitions. On the bottom line of the display “Yes” means that the user is assigned to the partition, “No” means that the user is not assigned to the partition.

  • Page 65: Deleting Users

    & i-onEX Range 4. Administration control that you want to assign to the user. 12. Press a button on a remote control (one that is not currently registered to any other user). If you do not have one press .
  • Page 66 4. Administration i-on40 & i-onEX Range Press .   Press  until you see:   Press . The bottom line of the display  shows the first user in a list of  the users recognised by the system.

  • Page 67: Viewing The Log

    & i-onEX Range 4. Administration Viewing the Log The control unit keeps a log of up to 2,000 events depending on control unit type. Typical events recorded are, for example, alarms and setting/unsetting events. To read the log: Make sure the display shows ...

  • Page 68: Testing The System

    4. Administration i-on40 & i-onEX Range Special User Control unit type Numbers User Identity i-on30 i-on40 i-on50 i-on160 Installer (see Note). Quick Set User Panel (Control Unit) Keyswitch User ARC Remote Reset Downloader Virtual keypad Note: The word “Web” will appear in the log entry if the installer logged on using the web browser.
  • Page 69 & i-onEX Range 4. Administration Press  .   The bottom line of the displays shows the first in a list of the siren types that you can test: Press .   If you have external radio...
  • Page 70 4. Administration i-on40 & i-onEX Range Press .   The keypad gives a double “beep” confirmation tone. The keypad display shows: The control unit turns on the wired sirens. Check that you can hear them. Press  again to turn the ...

  • Page 71: Keypad

    & i-onEX Range 4. Administration 15. Press .   The display shows the next item in the list of tests. 16. Press .   Press .   The keypad gives a double “beep” confirmation tone. The...

  • Page 72: Walk Test

    4. Administration i-on40 & i-onEX Range The display shows: Press  until you see:   Press . This display tells you to press any key on the keypad to test it. The bottom line of the display shows the number of ...
  • Page 73 & i-onEX Range 4. Administration Note that you cannot test wired HUA wired buttons, Fire detectors, and 24 hour zones during a walk test. The control unit will always start an alarm if you activate those detectors. (A 24- hour zone has detectors that are “live”...
  • Page 74 4. Administration i-on40 & i-onEX Range System This option allows you to walk round the entire system and test all the zones. Press  to select this option. Partitions (Only in partitioned systems.) Use this option to select one or more partitions, and test the zones only within those partitions.

  • Page 75: Outputs

      If the output has a name programmed for it, that will appear on the bottom line instead of the output number. Note: The display on the i-on40 will   look simpler, for example: Page 69...

  • Page 76: Remotes And Two-Way Keyfobs

    4. Administration i-on40 & i-onEX Range However, the sequence of key presses is the same for all i-on control units. Press  or  to display the   output you wish to test. a). Press . The keypad gives a double “beep”...
  • Page 77 & i-onEX Range 4. Administration Key in your access code (or   present a tag). Press  until you see:.   Press .  The display shows:  Press  until you see:   Press .

  • Page 78: Radio Hold Up Alarms

    4. Administration i-on40 & i-onEX Range remote. If the signal strength is less than 4 you should contact your installer. a). Press all the other buttons on the device. Each time you press a button on the remote the keypad gives a double “beep”...
  • Page 79 & i-onEX Range 4. Administration Press  until you see:.   Press .   The display shows: Press  until you see:   Press . The display asks you to press  both buttons on the radio HUA ...

  • Page 80: Proximity Tags

    4. Administration i-on40 & i-onEX Range signal strength is less than 4 you should contact your installer. Press and hold the buttons on any other HUA that you wish to test.  Each time you activate a HUA  the keypad gives a double “beep”...

  • Page 81: System Configuration

    & i-onEX Range 4. Administration Hold the prox tag against the   front of the keypad. The keypad gives a double “beep” confirmation tone. The bottom line of the display shows the user that the prox tag is allocated to. (Any name...

  • Page 82: Allowing Remote Access

    4. Administration i-on40 & i-onEX Range Make sure the display shows   the standby screen. Press   Key in your access code (or  present a tag).  Press  until you see:.   Press . ...
  • Page 83 & i-onEX Range 4. Administration an i-on30EX or i-on30EXD then note that it cannot communicate over a network cable.) When the control unit is delivered from the factory this facility is turned off. If an Installer wants to connect to your control unit remotely then a Master User can turn the remote access facility on.

  • Page 84: Setting The Date And Time

    4. Administration i-on40 & i-onEX Range access, and “OFF” to deny it. Press  when you have finished making changes. The keypad gives a double “beep” confirmation tone. The  keypad display shows:  Setting the Date and Time You will need to re-program the date and time if the control unit loses power for an extended time, and the battery is exhausted.

  • Page 85: Calendar Set

    Autumn. Calendar Set Note: This function is not available on the i-on30EX or the i-on40. Using the calendar set option you can program the control unit to set or unset the alarm system (or parts of it) at fixed times of day on a seven day cycle.
  • Page 86 4. Administration i-on40 & i-onEX Range Partitioned system then this option allows you to Full Set, Unset or Part Set any collection of partitions. There are two basic elements that you can program within the calendar set option: the “event” and the “exception”.
  • Page 87 & i-onEX Range 4. Administration Event Name. Key in a 12 character name (or press  to leave the default name). Event Time. Use the 24 hour clock. Note that if you specify a start time that is less than 10 minutes from the current time shown by the control unit clock then the event will not take action until the following start day.
  • Page 88 4. Administration i-on40 & i-onEX Range Exception Start Date. Key in the starting day and month in number format (for example 31/12 for 31 December). Exception End Time. Key in the end time in 24 hour format. Exception End Date. Key in the end day and month in numeric format (for example 02/01 for the 2 January).
  • Page 89 & i-onEX Range 4. Administration Note that deferring a setting event does NOT defer any unsetting events. If, after entering an access code, the user changes their mind about deferring a calendar set event, and wants to let the event go ahead, then they must press ...
  • Page 90 4. Administration i-on40 & i-onEX Range Calendar Set Example As an example, assume that you wish to set the alarm system every evening during the days Monday to Friday, and unset the alarm system every morning on Monday to Friday (leaving the system set over the weekend).
  • Page 91 & i-onEX Range 4. Administration 12. Key in the start time. In the example we want to make the whole day of the  bank holiday an exception, so  start at one minute past midnight. 13. Press .
  • Page 92 4. Administration i-on40 & i-onEX Range Next, you would program two events: event one sets the system in the evening on Monday to Friday, and event two unsets the system in the morning on Monday to Friday. To program the events: 20.
  • Page 93 & i-onEX Range 4. Administration 29. Repeat steps 27 and 28 for all the days you want the event to occur on. In the example this is Monday  through to Friday  30. Press . The keypad gives a double “beep”...
  • Page 94 4. Administration i-on40 & i-onEX Range 35. Press . The keypad gives a double “beep” confirmation tone. The  keypad display shows:  36. Press .  The display shows:  37. Repeat steps 22 to 35, but this time program the setting time.

  • Page 95: Programming Outputs

    4. Administration i-on40 & i-onEX Range Programming Outputs During programming the installer may allocate some outputs so that they can be reprogrammed by an Administrator. This section describes how the Administrator can use those outputs. For each output you can, if you wish, set an “on” time and an “off”...
  • Page 96 4. Administration i-on40 & i-onEX Range Note: The display on the i-on40 will   look simpler for example: However, the sequence of key presses is the same for all i-on control units. Press  or  to display the ...
  • Page 97 & i-onEX Range 4. Administration 14. Press . There are two options to “Latched”. “Yes”. The output stays on until a user deliberately turns it off. In addition, you can program the output to come  on and go off at fixed times ...

  • Page 98: Outputs

    4. Administration i-on40 & i-onEX Range 20. Press . The keypad gives a double “beep” confirmation tone. The  keypad display shows:  25. Press  to leave the menu. Note: You can switch the output on and off from the Menu by selecting Outputs On/Off (see page 110).
  • Page 99 & i-onEX Range 4. Administration 22. Press . The display shows the time  when the output will turn off.  23 Key in the time when you want the output to go off. Use the 24-hour clock in the format hh/mm.
  • Page 100 4. Administration i-on40 & i-onEX Range 27. Press  or  to change the “Yes” to a “No” or the “No” to  a “Yes”. For example:  28. Press  repeatedly to show the other days of the week, for ...

  • Page 101: Programming Remote Controls And Fob-2W-4B For Users

    & i-onEX Range 4. Administration Programming Remote Controls and Fob- 2W-4B for Users The System Config - Remotes option allows you to re-program buttons on an i-fb01 remote control or a FOB-2W-4B two-way keyfob. Set/Unset To program a remote button to set or unset: Make sure the display shows ...
  • Page 102 4. Administration i-on40 & i-onEX Range remote control, and the button you pressed. Go on to step 10. Note: If your system is a part setting system (there are no partitions) then you cannot reprogram the unset key on a remote control.
  • Page 103 & i-onEX Range 4. Administration Press  or  to show the button you wish to re-  program.  Press  to select the button. The bottom line shows:   Note: If your system is a part...
  • Page 104 4. Administration i-on40 & i-onEX Range c) Press  . The bottom line of the display now shows the first  item in a list of setting or  unsetting options that you can apply to the selected button. The setting options available are:...
  • Page 105 & i-onEX Range 4. Administration If you selected “Partitions” in step   10c) the display shows: c) Press  or  to select the   user‟s partition that you want to change. d) Press  to select between ...
  • Page 106 4. Administration i-on40 & i-onEX Range Press  until you see:.   Press .   Press  until the display  shows:  Press .   Press .   EITHER Press the button on the remote control that you wish to program.
  • Page 107 & i-onEX Range 4. Administration Press  to select it.   The display shows the first button on the remote control. Press  or  to show the  button you wish to re-  program. Press  to select the button.

  • Page 108: Deleting Remote Controls

    4. Administration i-on40 & i-onEX Range The bottom line of the display shows the first in a list of three actions that you can give to the button: “On” = Turns the output on. “Off” = Turns the output off.
  • Page 109 & i-onEX Range 4. Administration Key in your access code (or   present a tag). Press  until you see:.   Press .   Press  until the display  shows:  Press .  ...

  • Page 110: Remotes

    4. Administration i-on40 & i-onEX Range 11. Press . The keypad gives a double “beep” confirmation tone. The   keypad display shows: followed by: The control unit has deleted  the remote from its memory.  The remote can no longer be used on the system.

  • Page 111: Preventing Any Remote From Unsetting The System

    & i-onEX Range 4. Administration Press . The display shows:  (Press  if you decide you do  NOT want to delete all remotes.) 10. Press .   The keypad gives a double followed by “beep” confirmation tone. The ...

  • Page 112: Allowing Fob-2W-4B Or 727R To Start A Hua

    4. Administration i-on40 & i-onEX Range Press  until the display  shows:  Press .  The display shows:  10. Press . or  until the display  shows:  11. Press  The keypad gives a double “beep”...

  • Page 113: Starting A Call To Downloader

    & i-onEX Range 4. Administration Press .   Press  until the display  shows:  Press .   Press  until the display  shows:  Press .   The display shows: 10. Press . or  until the display ...
  • Page 114 4. Administration i-on40 & i-onEX Range There may be times when your Installer asks you to make your alarm system start a telephone call out to the installer's Downloader. Your alarm system is programmed to call up to two different telephone numbers. You do not have to know these numbers, your Installer will tell you to select one of them.

  • Page 115: Redirecting Speech Messages

    & i-onEX Range 4. Administration to Downloader for several minutes.  When Downloader has finished  and the connection is broken the display shows the time and date. Redirecting Speech Messages Note: This option is available only if you have the a speech dialler module fitted inside the control unit and it has been programmed by the installer.

  • Page 116: Turning Outputs On/Off

    4. Administration i-on40 & i-onEX Range Press . The display shows the current  phone number, for example:  10. Key in the new phone number. If necessary, press  to move the cursor left, or  to move ...

  • Page 117: Outputs On/Off

    & i-onEX Range 4. Administration Press   Key in your access code (or  present a tag).  Press  until you see:.   Press . The display shows the first in a list of the outputs that are ...

  • Page 118: What System Have I Got

    4. Administration i-on40 & i-onEX Range What System Have I Got? There may be times, when your installer is helping you with a problem over the phone, that they ask you what system you have and what software version it is running. You can find this information as follows.
  • Page 119 & i-onEX Range 4. Administration Press  until you see:   Press .   Press . until the display  shows:  Press . The bottom line of the display  shows the module type  currently fitted (or the word “None”...

  • Page 120: List Of Menu Options

    & i-onEX Range List of Menu Options Item Page Omit Zones Users Add User Edit User (for each user:) Name Type (not U01, U001) Partitions (not in part setting system) Code Prox Tag Remote Hold Up Alarm Delete User...

  • Page 121: Alarm Functions At A Glance

    & i-onEX Range Alarm Functions At a Glance Display shows: Time and date when system off (unset). First zone to alarm after alarm Read log here. Glowing = On (set) Off = Off (unset) Flashing = Part Set (part setting systems only)

  • Page 122: After An Alarm

    & i-onEX Range After an Alarm N ORDER TO O THIS HE SYSTEM WILL Switch off siren: EITHER: Stop the siren. The Key in ACCESS keypad display CODE shows the first zone OR present tag. to alarm. Reset the system: Press .

This manual is also suitable for:

I-onex

Table of Contents