Installer Mode Programming; Editing Text - Cooper Security i-on40 Programming Reference Manual

i-on40

Installer Mode Programming

This section is a reference for all the options provided in
the Installer Menu. Apart from "Naming Things/Editing
Text" below all the section headings appear in the same
order as the options appear in the Installer Menu on a
keypad.

Editing Text

In the i-on40 zones, setting levels, partitions, keypads,
outputs and users can all be named. Also, account
numbers for Downloader can take letters as well as
numbers. Whenever you have to edit the text for an item
the steps are the same:
Each number on the keypad is associated with a range of
letters in the same way as on many mobile phones.
Figure 1 shows which letters appear on each key.
Figure 1. Letters Assigned to Keys
A cursor on the display shows where the next character
will go when you key it in. If you are keying in capitals
the cursor is a block, for small letters the cursor is an
underline.
To change between capital and small letters press #.
When you first select a name to edit, the display shows
the cursor at the beginning of the bottom line. If you
press a number or letter key then the bottom line clears
and the character you keyed-in appears at the beginning
of the line. Alternatively, if you press > when you first
select a name to edit, then the existing text shifts right
1 2 abc
A B C
4 ghi 5 jkl
J K L
G H I
7 pqrs 8 tuv
P Q R S T U V
*
0
Space 0
3 def
D E F
6 mno
M N O
9 wxyz
W X Y Z
#
(Caps/
lower case)
Page 7