Installing Front Handles/Rack Mounting Flanges - Keysight E4990A Installation Manual

Introduction
Environmental Requirements

Installing Front Handles/Rack Mounting Flanges

The E4990A can be installed on a workbench or on a rack.
This section describes how to install the front handles (Option 1CN) used for
moving or transporting the instrument, and how to install the analyzer in an
equipment rack as part of a measurement system (Option 1CM: without the
handles, Option 1CP: with the handles).
Figure 1-2 Installing front handle/rack-mount kits
14 Keysight E4990A Impedance Analyzer