Huawei eSpace IAD104H Quick Start Manual page 16

eSpace IAD104H
Quick Start
Step 2 Log in to the web management system and click
Step 3 Configure network parameters for the IAD104H.
Issue 10 (2019-04-09)
After the protocol is changed, the IAD will automatically
restart. The data, if not saved, will be lost after the IAD restart.
Therefore, you must save the settings before changing the
protocol.
4. Choose Advanced Configuration > Protocol Mode.
The Protocol Mode page is displayed.
2. Select SIP and click OK.
1. Click Start.
The Basic Configuration > Network Parameter page is
displayed.
5. Set WAN parameters as planned.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
.
14