Huawei eSpace IAD104H Quick Start Manual page 39

eSpace IAD104H
Quick Start
Step 9 (Optional) Click Next and configure the SIP digitmap.
Step 10 Save the settings.
Issue 10 (2019-04-09)
Parameters marked in the figure are mandatory in the scenario
where the system connects to the IMS network.If the U1900 is used,
set Register mode to individual.
2. Click OK.
A digitmap indicates a dialing rule, which is used to determine
whether the range and length of the dialed number comply
with the dialing rule. The SIP digitmap commonly used by the
IAD is [XABCD*#].T, which is the default value. For details
about the digitmap and configuration procedure, see
Configuration > Manual Configuration (Web) > SIP
Service Configuration > Configuring a SIP Digitmap in the
eSpace IAD104H Product Documentation.
1. Click Next.
The Maintenance > Save Data page is displayed.
2. Click OK.
3. Click Finish.
If you want to configure other data, see the eSpace
IAD104H Product Documentation
---- End
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
37