Huawei eSpace IAD104H Quick Start Manual page 44

eSpace IAD104H
Quick Start
Operation
Set the physical
serial number
(which consists
of 1 to 64
characters)
Step 3 Run the write command to save the settings.
Issue 10 (2019-04-09)
Command
physical-serial-num
Run the display nms command to view status of the IAD
registering to the UCEMS.
TERMINAL#display nms
the config is IP /*It indicates that the address of the
UCEMS has set through a domain name.*/
-------------------------------------------------------
-----------------
type
primary
secondary
-------------------------------------------------------
-----------------
get community
set community
trap community : ********
trap port : 162
nms access value: Enable
register nms ip : 192.168.1.201
register state : succeed
handshake : on
handshake time : 30 S
register switch : on
If the "register state" field displays "succeed", it indicates that
the IAD has registered to the UCEMS successfully.
----End
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IP address
192.168.1.201
<unconfig>
: ********
: ********
5 Configuration (EMS)
Default Value
Unique physical
serial number of
each IAD.
status
normal
unconfiged
42