Huawei eSpace IAD104H Quick Start Manual page 27

eSpace IAD104H
Quick Start
Step 5 Configure the MGC data.
Step 6 (Optional) Set the MGCP software parameters.
Issue 10 (2019-04-09)
All values of the MG parameters must be the same as those
configured on MGC.
3. Click OK.
1. Click Next.
The MGCP Service Configuration > MGC page is
displayed.
2. In the MGC1 area, set Config model to IP address mode
and enter the MGC IP address in the MGC IP field.
3. Click OK.
If the DNS server has been configured on the network, set Config
model to DNS and then configure the MGC domain name.
1. Click Next.
The MGCP Service Configuration > Soft Parameter
page is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
25