Huawei eSpace IAD104H Quick Start Manual page 21

eSpace IAD104H
Quick Start
Step 8 Save the settings.
Verification
Issue 10 (2019-04-09)
A digitmap indicates a dialing rule, which is used to determine
whether the range and length of the dialed number comply
with the dialing rule. The SIP digitmap commonly used by the
IAD is [XABCD*#].T, which is the default value. For details
about the digitmap and configuration procedure, see
Configuration > Manual Configuration (Web) > SIP
Service Configuration > Configuring a SIP Digitmap in the
eSpace IAD104H Product Documentation.
1. Click Next.
The Maintenance > Save Data page is displayed.
2. Click OK.
3. Click Finish.
If you want to configure other data, see the eSpace IAD104H
Product Documentation.
---- End
After the preceding configuration is complete, the IAD is
running properly. You can use the following method to verify
the configuration:

Choose SIP Service Configuration > FXS User. The
FXS configuration page is displayed. View the user
registration status. If the state is Registered, it indicates
that the user is registered successfully.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
19