Huawei eSpace IAD104H Quick Start Manual page 32

eSpace IAD104H
Quick Start
Item
IP address of the uplink gateway
Procedure
Step 1 Configure the communication protocol.
Issue 10 (2019-04-09)
After the protocol is changed, the IAD will automatically
restart. The data, if not saved, will be lost after the IAD restart.
Therefore, you must save the settings before changing the
protocol.
1. Choose Advanced Configuration > Protocol Mode.
The Protocol Mode page is displayed.
2. Select SIP and click OK.
The protocol change will trigger the IAD restart. The
restart process takes about 2 minutes. Re-log in to the web
management system after the IAD restart.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
Data
192.168.1.1
NOTE
The gateway IP address must be in
the same network segment as the
IAD IP address. Contact the network
administrator to obtain the gateway
IP address.
30