Connecting To Ngn/Ip Pbx (Sip) - Huawei eSpace IAD104H Quick Start Manual

eSpace IAD104H
Quick Start

4.2 Connecting to NGN/IP PBX (SIP)

Data Preparation
Item
Control protocol
used between the
softswitch and
the IAD
IP address of the
softswitch
Issue 10 (2019-04-09)
The web management system provides inner help information on the
Web page. Configure the data according to the help information.
And this document does not introduce the help information
repeatedly.
The users of the IAD104H register with the softswitch (for
example, Softx3000 and U1900) to implement the voice
service. After configuring the softswitch data, configure the
IAD104H data to use the voice service, including basic call
and fax services.
In this example, the U1900 functions as the softswitch. You
can obtain the connection data and other network data such as
the default gateway between the IAD and the U1900 from the
network carrier or network administrator. The following
describes how to enable the voice function for an IAD104H
user.
Table 4-1 Connection data between the IAD and the Softswitch
(for example, U1900)
Value
SIP protocol
192.168.1.40/255.25
5.255.0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
Parameter and Value on
the IAD
Protocol mode: SIP
IP address of the SIP
server: 192.168.1.40
11