Huawei eSpace IAD104H Quick Start Manual page 35

eSpace IAD104H
Quick Start
Issue 10 (2019-04-09)
2. Set Obtain type to STATIC and click OK.
The IAD provides three methods of obtaining the SIP server IP
address, including STATIC, DNS, and DHCP.
 If the DNS server has been configured on the network, set
Obtain type to STATIC or DNS and then configure the SIP
server by domain name.
 If Obtain type is set to DHCP, configure the SIP server by
DHCP.
For details, see eSpace IAD104H Product Documentation.
3. (Optional) Select a value for SIP server register mode
and click OK.
The IAD104 supports three registration modes. Select a
mode according to the help information.
4. Select the record corresponding to index 0 and click
Modify.
a. Enter a value for Invite response time(s) .
b. Click OK.
The IAD104H first sends a call request to the current
registration server. If the server does not respond and the
request times out, the IAD104H sends the call request to
the next registration server.
5. Select the record corresponding to index 0 and click
Modify.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
33