Huawei eSpace IAD104H Quick Start Manual page 25

eSpace IAD104H
Quick Start
Step 2 Log in to the web management system and click
Step 3 Configure network parameters for the IAD104H.
Issue 10 (2019-04-09)
The protocol change will trigger the IAD restart. The
restart process takes about 2 minutes. Re-log in to the web
management system after the IAD restart.
1. Click Start.
The Basic Configuration > Network Parameter page is
displayed.
2. Set WAN parameters as planned.
There are three methods of obtaining the IP address. Select a method
based on the actual networking scheme. For details, see the help
information.
3. Click Save.
The confirmation dialog box is displayed.
4. Click OK.
The web management system automatically restarts.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
.
23