Huawei eSpace IAD104H Quick Start Manual page 46

eSpace IAD104H
Quick Start
Issue 10 (2019-04-09)
If you forget the password of the system user, see the eSpace IAD
Troubleshooting Guide.
Q: How do I restore the IAD to factory settings?
4.
A: Log in to the CLI, and run the enable and configure
terminal commands in sequence to enter the global
configuration mode. Then run the restore vendor-config
command. Restart the IAD for the settings to take effect.
Q: How to restart the IAD?
5.
A: Log in to the CLI, and run the enable and configure
terminal commands in sequence to enter the global
configuration mode. Then run the reboot command.
Q: How do I view the IP address of the IAD?
6.
A: Use a network cable to connect a PC to the LAN port
on the IAD, and enter telnet 192.168.100.1 in the Run
dialog box to log in to the IAD. The default user name is
root, and the default password is huawei123(For
V300R001,the password is admin). In the privilege
mode, run the display ipaddress command to display the
IP address. For details, see the eSpace IAD Product
Documentation.
Q: How do I change the IP address of the IAD?
7.
A: For details, see Maintenance > Changing IP address
in the eSpace IAD Product Documentation.
Q: How do I view the MAC address of the IAD?
8.
A: Log in to the CLI, and run the enable and configure
terminal commands in sequence to enter the global
configuration mode. Then run the display mac-address
command.
Q: How do I view the physical sequence number of the
9.
IAD?
A: Log in to the CLI, and run the enable and configure
terminal commands in sequence to enter the global
configuration mode. Then run the display
physical-serial-num command.
Q: How do I view the elabel of the IAD?
10.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 FAQs
44