Huawei eSpace IAD104H Quick Start Manual page 17

eSpace IAD104H
Quick Start
Issue 10 (2019-04-09)
There are three methods of obtaining the IP address. Select a method
based on the actual networking scheme. For details, see the help
information.
3. Click Save.
The confirmation dialog box is displayed.
4. Click OK.
The web management system automatically restarts.
 If the IP address obtaining mode is changed, the IAD restarts
automatically for the configuration to take effect. You can dial
*127 using a phone connected to the IAD and listen to the IP
address played by the phone, or you can connect to the IAD
using a serial cable to check the new IP address.
 If obtaining an IP address in DHCP or PPPoE mode is selected
but the IAD fails to obtain an IP address in this mode, it takes
about 8 minutes for the IAD to restart. In this case, check
whether the DHCP or PPPoE server is available and whether the
server information is correctly configured.
After the IP address is changed, re-log in to the web
management system, click
and click Start to access the Basic Configuration >
Network Parameter page again.
5. (Optional) Configure the DNS server.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
,
15