Huawei eSpace IAD104H Quick Start Manual page 12

eSpace IAD104H
Quick Start
Issue 10 (2019-04-09)
 Dial *127 on the phone connected to the IAD, and then the
voice announcement plays the IP address.
 Log in to the IAD through the serial port and run the display
ipaddress command in the common user mode to view the IP
address of the device. For details about how to log in to the IAD
through the serial port, see Configuration > Manual
Configuration(CLI) > Logging in to the CLI > Logging In
Through Local Serial Port in the eSpace IAD104H Product
Documentation.
2. Set the system language to simplified Chinese or English
as required. Enter the user name and password and click
Login. By default, the user name is root, the password is
huawei123.
The home page of the web management system is
displayed, as shown in
 If a user enters incorrect passwords three consecutive times, the
system will lock the user for 5 minutes.
 If a user performs no operation within 10 minutes, the user will
be automatically logged out.
Figure 4-2 Home page
3. After you log in to the system, you can click Change
Password at the upper right corner of the page to set a
new password. After the password is set, record related
data.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Manual Configuration (CLI)
Figure 4-2.
10