Removing The; Removing The Rear Cover; Removing The Feeder Cover; Removing The Locking Motor Drive Unit - Canon DADF-M1 Service Manual

Chapter 3
3.4.11.2 Removing the Front
Cover
1) Remove the 3 screws [1], and detach the front cover
[2] by moving it in the direction of the arrow.
[1]
[1]
[2]
F-3-100
3.4.11.3 Removing the Rear
Cover
1) Open the feeder cover [1] and the original pickup
tray [2]; then, remove the 4 screws [3], and detach the
rear cover [4].
[2]
F-3-101
3-26
0004-1940
0004-1941
[1]
[3]
[4]
3.4.11.4 Removing the Feeder
Cover
1) Remove the E-ring [1].
[1]
F-3-102
2) Remove the screw [1] and the positioning pin[2];
then, detach the feeder cover [3].
[3]
[2]
F-3-103
3.4.11.5 Removing the Locking
Motor Drive Unit
1) Remove the 3 screws [1], and disconnect the
connector [2]; then, detach the locking motor drive
unit [3].
0004-1942
[1]
0004-1943