Canon DADF-M1 Service Manual page 32

Chapter 2
2. Normal
rotation pickup/
reversal delivery
3. Idle feed/
reversal pickup/
reversal delivery
4. Idle feed/
reversal pickup/
delivery
MEMO
The machine executes idle rotation for a mix of sheets of the same configuration only if it identifies the paper in the
tray at the beginning of the copy job as being LGL.
A sheet of paper is identified as follows in terms of size:
small-size: B6, A5, A4, B5, LTR, STMT
2-6
picks up an original, and
reverses and delivers it after it
has been read.
executes idle feed to find out
the size of the original; then,
executes idle feed so that the
reading may start with the
face of the original; then,
picks up, reverses, and
delivers it after it has been
read.
executes idle feed to identify
the size of the originals,
reverses it, and delivers it
after it has been read.
double-sided original ->
double-sided print
double-sided original ->
single-sided print
double-sided original of
different configurations ->
double-sided print
double-sided original of
different configurations ->
single-sided print
double-sided original of
same configuration ->
double-sided print (inch-
configuration only)
double-sided original of
same configuration ->
single-sided prints (inch-
configuration only)
single-sided original of
different configurations ->
single-sided print
single-sided-original of
different configurations ->
double-sided print
single-sided original of
same configuration ->
double-sided print (inch-
configuration only)
single-sided original of
same configuration ->
single-sided print (inch-
configuration only)