Removing The; Removing The Rear Cover; Removing The Delivery Reversal Motor Unit; Removing The Drive Unit - Canon DADF-M1 Service Manual

[1]
[1]
[2]
F-3-69
3.4.8.2 Removing the Rear
Cover
1) Open the feeder cover [1] and the original pickup
tray [2]; then, remove the 4 screws [3], and detach the
rear cover [4].
[2]
F-3-70
3.4.8.3 Removing the Delivery
Reversal Motor Unit
1) Remove the 2 screws [1], and detach the delivery
0003-7138
[1]
[3]
[4]
0004-0464
reversal motor unit [2].
[2]
F-3-71
3.4.8.4 Removing the Drive
Unit
1) Remove the 4 screws [1], and detach the drive unit
[2].
Be sure to free the harness from the wire saddle
[3]. When mounting it, be sure to route the harness
through the wire saddle [3].
F-3-72
After mounting it, check to make sure that the arm
[1] of the pickup clutch is above the bin [2].
Chapter 3
[1]
0004-0695
[1] [2]
[3]
[1]
3-19